Bay Motor Products - Engineering Inquiry

Engineering Inquiry

Please fill out form below and click on the Send Request button. We will get back with you as soon as possible. Click HERE to simply send us an email with a general question.

Thank You and we look forward to helping in any way possible.

Form Instructions: Please note that in order for the Bay Motor Products Engineering Department to effectively assist you with your questions the fields marked with "*" are required.

Company Name:*
Contact Name:*	(Ex. John Doe)
Day Phone:
Fax:
E-Mail:*
Application:
Temperature of Environment:	(In Fahrenheit)
Voltage Requirements:	If Other please specify, otherwise leave blank
Hz:
Number of Speeds:
Motor Specifications: (Please click HERE* and specify the following)*
Shaft dia./ length in inches:
Flat or Full round:		If Flat, specify length, otherwise leave blank
Rotation: (viewing shaft)
Ball bearing or sleeve:
Cooling Fan:
*Motor Mounting:*
Shaft End or Opposite Shaft End:		If Other please specify, otherwise leave blank
Taps or Bolt Extensions:		If Other please specify, otherwise leave blank
*Termination Preferences:*
Wire leads w/bear wire strip:			If Yes, specify lead length, otherwise leave blank
Attached 1/4" terminals:			If Yes, specify location, otherwise leave blank If bent, please specify degree
Other:
Torque:			(Oz/In)
Fan Preferences: (Check the boxes next to the fan type you require and continue with the specifications for that type.)
Axial If you checked Axial please specify the options below:
Blade Type:
Blade Rotation:
Blade Diameter in inches:
Centrifugal If you checked Centrifugal please specify the options below:
Requested material:
Blower wheel specs:
Crossflow/Tangential If you checked Crossflow/Tangential please specify the options below:
Blower length in inches:
Other If you checked Other please enter a brief description of the motor type you require:
Please describe:
RPM:			(Free air) Static Pressure: (if known please specify)
Questions or Comments: (Please enter anything here that you feel would be important for us to know)
* Please fax us a set of blue prints of you have them to 231-941-7566 *

(Please click only once. Thank you!)